$419.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to pickup this item from our store please call on 03 9095 7957 to check availability.
This kit is ideal to run air lockers, air horns, light air tools or situations
where small volume air is needed
Includes
1 x PX-02 1/4 hp 12 volt BOSS Air Compressor
1 x AT-01 1 Gallon/ 3ltr Boss Aluminium Air Tank
1 x 70-100psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Brass “T” for pressure switch
1 x Drain Tap
Instruction Sheet
$429.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to pickup this item from our store please call on 03 9095 7957 to check availability.
This kit is suitable to run air lockers, small air tools, small tires and situations where reasonable air volume is needed. Great tank to mount alongside chassis.
Includes
1 x PX-02 1/4 hp 12 volt BOSS Air Compressor
1 x AT-02 2 Gallon/ 6ltr Boss Aluminium “Hotdog” Air Tank
1 x 70-100psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Brass “T” for pressure switch
1 x Drain Tap
Instruction Sheet
$799.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to pickup this item from our store please call on 03 9095 7957 to check availability.
This onboard air kit will give you full control of your Load Assist Air Bag Suspension height from inside the cab with good volume of air supply for air tools, inflation of 4×4 tyres for you and your mates.
Includes
1 x PX-07 3/4 hp 12 volt BOSS Air Compressor
1 x AT-03 3 Gallon/ 9ltr 5 port Boss Aluminium Air Tank
1 x 110-150psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Drain Tap
1 x 3/8” 12v Electric Solenoid/ Valve
1 x 12volt momentary switch for compressor
1 x BOSS 200psi Dual Needle back-lit Gauge
2 x Pneumatic Push Buttons for dropping each bag
1 x Stamped stainless steel gauge panel
4 x 1/4” female push fittings for gauge and buttons
10 meters of 1/4” J844 DOT Airbrake line
2 x 3/8 check valves
5 x 1/4” push connect fittings
3 x Y Connectors,
2 x T Connectors
3/8” x 3/8”NPT push fitting for connecting your air line
1/4” x 3/8”NPT fitting to connect airbrake line to air locker
10 x Cable Ties
Instruction Sheet
$899.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to pickup this item from our store please call on 03 9095 7957 to check availability.
The “Ducks Nuts” in onboard air kits, this kit will give you everything, good volume of air supply for air tools, inflation of 4×4 tyres for you and your mates as well as controlling your Boss Load Assist kit from inside your cab and supply regulated air to your Air Lockers protecting the seals.
Includes
1 x PX-07 3/4 hp 12 volt BOSS Air Compressor
1 x AT-03 3 Gallon/ 9ltr 5 port Boss Aluminium Air Tank
1 x 110-150psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Drain Tap
1 x 3/8” 12v Electric Solenoid/ Valve
1 x 12volt momentary switch for compressor
1 x BOSS 200psi Dual Needle back-lit Gauge
2 x Pneumatic Push Buttons for dropping each bag
1 x Stamped stainless steel gauge panel
4 x 1/4” female push fittings for gauge and buttons
15 meters of 1/4” J844 DOT Airbrake line
2 x 3/8 check valves
5 x 1/4” push connect fittings
3 x Y Connectors,
2 x T Connectors
3/8” x 3/8”NPT push fitting for connecting your air line
1/4” x 3/8”NPT fitting to connect airbrake line to air locker
15 x Cable Ties
1 x Mini Regulator with Gauge for Air Locker Feed
1 x 1/4” x 3/8”NPT fitting
1 x 1/4” x 1/4” hex nipple
Instruction Sheet
$569.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to pickup this item from our store please call on 03 9095 7957 to check availability.
This kit is suitable to run air lockers, inflate tires, run small air tools and situations where bigger volume air is needed but space is tight.
Includes
1 x PX-07 3/4 hp 12 volt BOSS Air Compressor
1 x AT-03 3 Gallon/ 9ltr Boss Aluminium Air Tank
1 x 110-135psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Drain Tap
1 x 1/4”NPT Bung
1 x 3/8” x 3/8”NPT push fitting for connecting your air line
Instruction Sheet
$589.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to pickup this item from our store please call on 03 9095 7957 to check availability.
This kit is suitable to run air lockers, 4×4 tires, your buddies 4×4 tires, and his friends 4×4 tires, small air tools and situations where lots of air volume is needed.
Includes
1 x PX-07 3/4 hp 12 volt BOSS Air Compressor
1 x AT-05 5 Gallon/ 16ltr Boss Aluminium Air Tank
1 x 110-150psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Drain Tap
1 x 1/4”NPT Bung
1 x 3/8” x 3/8”NPT push fitting for connecting your air line
Instruction Sheet
$649.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to pickup this item from our store please call on 03 9095 7957 to check availability.
This kit is ideal to run air lockers plus have lots of air volume at hand for operating 4×4 tires, your buddies 4×4 tires, and his friends 4×4 tires, small air tools etc. Gives control over pressure to the air lockers to protect the seals, but leaves you with plenty of air volume for tools.
Includes
1 x PX-07 3/4 hp 12 volt BOSS Air Compressor
1 x AT-03 3 Gallon/ 9ltr Boss Aluminium Air Tank
1 x 110-150psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Drain Tap
1 x 3/8” x 3/8”NPT push fitting for connecting your air line
1 x Mini Regulator with Gauge for Air Locker Feed
10 meters of 1/4” J844 DOT Airbrake line
1 x 1/4” x 3/8”NPT fitting to connect air locker
8 x Cable Ties
Instruction Sheet
$419.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to arrange pickup, please call on 03 9095 7957 to check availability.
This kit is used to control Load Assist Kits or airbag suspension from inside your cab without the need for a tank and electric valves.
Simple installation and controls bags independently up and down.
includes
$95.00
12v Small Air compressor
Oil less compressor can be mounted vertical or horizontal for easy installation
Mounting sizes are
70mm centres wide and 145mm centres long
$199.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to arrange pickup, please call on 03 9095 7957 to check availability.
12volt compressor 1/4 hp 1.5cfm free flow 50% duty cycle, recommended working pressure 0-150psi – max pressure 200psi 3/8npt port head, built in air filter, Crankcase fed design, max amp draw 25amps start up under load – oil free design, quite running, rebuildable design, 3 mounting holes with rubber grommets MUST USE CHECK VALVE TO PREVENT BACK FLOW + 25AMP CIRCUIT BREAKER – NEVER OIL THIS COMPRESSOR
Includes:
$275.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to arrange pickup, please call on 03 9095 7957 to check availability.
12 volt compressor 1/4 hp 1.5cfm free flow 50% duty cycle, recommended working pressure 0-150psi – max pressure 200psi 3/8npt port head, built in air filter, Crankcase fed design, max amp draw 25amps start up under load – oil free design, quite running, rebuild-able design, 3 mounting holes with rubber grommets MUST USE CHECK VALVE TO PREVENT BACK FLOW + 25AMP CIRCUIT BREAKER – NEVER OIL THIS COMPRESSOR
Includes:
$239.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to arrange pickup, please call on 03 9095 7957 to check availability.
12 volt compressor 1/4 hp 1.5cfm free flow 50% duty cycle, recommended working pressure 0-150psi – max pressure 200psi 3/8npt port head, built in air filter, Crankcase fed design, max amp draw 25amps start up under load – oil free design, quite running, rebuildable design, 3 mounting holes with rubber grommets MUST USE CHECK VALVE TO PREVENT BACK FLOW + 25AMP CIRCUIT BREAKER – NEVER OIL THIS COMPRESSOR
Includes:
$249.00
12v 100% duty cycle ideal for air suspension use. Oil less compressor can be mounted vertical or horizontal for easy installation
Mounting sizes are
85mm centres wide and 225mm centres long
$349.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to arrange pickup, please call on 03 9095 7957 to check availability.
Suitable for industrial and automotive use.
Up to 30L tanks. Best used with an air tank.
Compressor Specs:
12 volt compressor 3/4 hp engine
100% duty cycle
170 ltr free flow rate (approx 3.5cfm)
Recommended working pressure 0-150psi maximum pressure 200psi
Up to 60 amp maximum draw
Fan cooled engine and cylinder head oil free design
3/8npt ported head rebuildable crank case fed
external washable air filter
cast aluminum legs
special piston valve design for maximum performance
Note: must use check valve to prevent back flow+ 80 amp fuse - do not oil compressor.
View full product details$439.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to arrange pickup, please call on 03 9095 7957 to check availability.
12v-24v Air Compressor 3/4 hp engine 100% duty cycle 170ltr free flow rate (approx 3.5cfm) recommended working pressure 0-150psi maximum pressure 200psi – 35 amp maximum draw. Fan cooled engine and cylinder head, oil free design, 3/8npt ported head, rebuildable design, crank case fed – external washable air filter, cast aluminum legs, special piston valve design for maximum performance – MUST USE CHECK VALVE TO PREVENT BACK FLOW+ 80 AMP FUSE – NEVER OIL THIS COMPRESSOR
$389.00
This item may be shipped from either our warehouse in Narre Warren or Boss Suspension in QLD depending on stock levels, if you are wanting to arrange pickup, please call on 03 9095 7957 to check availability.
Suitable for industrial and automotive use. Up to 30L tanks. Best used with an air tank.
Package includes :
Boss 3/4HP Air Compressor
Braided Hose
Check Valve 3/8"
Flare Fitting
Note: must use check valve to prevent back flow+ 80 amp fuse - do not oil /b>
Compressor Specs:
12 volt compressor 3/4 hp engine
100% duty cycle 170 ltr free flow rate (approx 3.5cfm)
Recommended working pressure 0-150psi maximum pressure 200psi
Up to 60 amp maximum draw
Fan cooled engine and cylinder head oil free design
3/8npt ported head rebuildable crank case fed external
washable air filter
cast aluminum legs
special piston valve design for maximum performance
Note: must use check valve to prevent back flow+ 80 amp fuse - do not oil compressor.
View full product details