Large PRO Catch Can with Washable Filter - Nissan GQ / GU Patrol

Sold Out

This UNIVERSAL Professional Catch Can allows you to filter the air from your crankcase and filter the oil / contaminates from you inlet system, which in-turn stops the oil entering the turbo and sludging up the inlet manifold.

• Universal fitment.
• Features 25mm inlet and outlet .
• The multi layer stainless steel mesh filter traps oil from your blow by air.
• Filter can be washed or replaced.
• Features an oil drain that can be capped or returned to the sump etc.
• Excess pressure relief valve.
• Pressure regulator.
• Completely legal (closed system).
• Factory appearance.
• The unit is of a high quality and built tough!

NOTE:
This Unit is sold as a UNIVERSAL catch can....meaning it can be made to fit any vehicle
BUT it means the installer may need to purchase additional Hoses and fittings to fit
the unit in the position the owner wishes to fit it, just like any other catch can.

All dimensions are listed in the diagram above.

These have been fitted these to everything from ls1's to patrol's and tractors.

Large PRO Catch Can with Washable Filter - Toyota Landcruiser 80 / 100 / 105 / 76 / 79 Series

Sold Out

This UNIVERSAL Professional Catch Can allows you to filter the air from your crankcase and filter the oil / contaminates from you inlet system, which in-turn stops the oil entering the turbo and sludging up the inlet manifold.

• Universal fitment.
• Features 25mm inlet and outlet .
• The multi layer stainless steel mesh filter traps oil from your blow by air.
• Filter can be washed or replaced.
• Features an oil drain that can be capped or returned to the sump etc.
• Excess pressure relief valve.
• Pressure regulator.
• Completely legal (closed system).
• Factory appearance.
• The unit is of a high quality and built tough!

NOTE:
This Unit is sold as a UNIVERSAL catch can....meaning it can be made to fit any vehicle
BUT it means the installer may need to purchase additional Hoses and fittings to fit
the unit in the position the owner wishes to fit it, just like any other catch can.

All dimensions are listed in the diagram above.

These have been fitted these to everything from ls1's to patrol's and tractors.

Roadsafe 4wd LandCruiser 80 & 105 Series Drag Link / Relay Rod

Sold Out $275.00

The drag link or relay rod is the connection from the steering box (or the pitman arm at the base of the steering box) to the steering knuckle or in some cases it connects the tie rod assembly. (When a wheel alignment is done on a vehicle this is one of the things that is adjusted.) They are essentially the central connection for steering boxes and due to this must be strong and durable. A worn drag link can cause a variety of steering related issues including wandering, erratic steering and excessive tyre wear. These upgraded relay rods are stronger and thicker than the factory fitted product and also suit lifted vehicles.

Classified as the 'startup' version of rod, it is much stronger than the factory standard with an outside diameter of 30mm and a wall thickness of 5.7 mm. The drag link is finished in a durable black coating for corrosion and rust resistance, and is suitable as an upgraded replacement for a standard or lifted LandCruiser.

Suits:

Toyota Landcruiser 80 & 105 Series1/90-on FJ80, FZJ80, HDJ181, HZJ181, HZJ80, HDJ80, HZJ81, HDJ81, HZJ105, FZJ105

Kit contains:

• Drag Link Rod - 840mm long
• Castle nuts
• Split pins

Roadsafe 4wd LandCruiser 80 & 105 Series Heavy Duty Track Rod

$220.00 $275.00

The tie rod also known as a track rod is an adjustable rod that runs behind the diff connecting the left and right wheels. Its main purpose is to control the track or toe in/out of the wheels and ensure they are aligned. (When a wheel alignment is done on a vehicle this is one of the things that is adjusted.) Given its position it becomes vulnerable in four wheel drives when going off road, therefore upgrading to a thicker, tougher track rod is recommended.

This track rod is a serious piece of equipment with an outside diameter of 34mm and a wall thickness of 6.5mm. The rod is finished in a durable black coating for corrosion and rust resistance, and is suitable as an upgraded replacement for a standard or lifted vehicles.

Suits:

Toyota Landcruiser 80 & 105 Series1/90-on FJ80, FZJ80, HDJ181, HZJ181, HZJ80, HDJ80, HZJ81, HDJ81, HZJ105, FZJ105

Kit contains:

• Track Rod - 1120mm long
• Castle nuts
• Split pins

Roadsafe 4WD Toyota Landcruiser 80 / 105 Series Rear Lower Trailing Arm Bush

Sold Out

Description:

To supplement our range of standard front end lines Roadsafe have developed a range of rubber bushings suitable for 4WD Applications. Manufactured from Natural Rubber, the Roadsafe rubber bushings offer longer wear characteristics, in addition to the ability to absorb minor vibrations and noise from neighbouring suspension parts. Natural Rubber bushings are generally noise free in their own operation (when in good condition!).

Designed to OE dimension specifications, Roadsafe Replacement Trailing Arm Bushings can be purchased to suit for a wide range of trailing arms.

Note : You require 4 of these to do ONE car, this is for ONE BUSH ONLY.

Roadsafe 4WD Toyota Landcruiser 80 / 105 Series Rear Lower Trailing Arm Bush Set of 4

Sold Out

Full Set of 4

Description:

To supplement our range of standard front end lines Roadsafe have developed a range of rubber bushings suitable for 4WD Applications. Manufactured from Natural Rubber, the Roadsafe rubber bushings offer longer wear characteristics, in addition to the ability to absorb minor vibrations and noise from neighbouring suspension parts. Natural Rubber bushings are generally noise free in their own operation (when in good condition!).

Designed to OE dimension specifications, Roadsafe Replacement Trailing Arm Bushings can be purchased to suit for a wide range of trailing arms.

You require 4 of these to do ONE car, this is for a complete set.

Roadsafe 4wd Toyota Landcruiser 80 100 105 Series Heavy Duty Recovery Tow Point Kit

$175.00

• Made from 10mm SS41 carbon steel plate
• Direct bolt onto your chassis using high tensile bolts - no cutting or welding required
• Powder coated yellow for high visibility
• Matched pair - specific to each side
• Allow for use of 4.7T bow shackles and a bridle strap
• Rated to a Working Weight Limit (WWL) of 5000 Kg per tow point
• Elongated hole for mounting of bow shackle

To suit:

• Nissan Patrol GU Series 3 to 5
• Toyota LandCruiser 80 series
• Toyota LandCruiser 100 series
• Toyota LandCruiser 105 series

This kit comes complete with the following items.

• 2 x Tow Point
• 2 x Nuts on wires
• 8 x Bolts
• 2 x 4.7T Bow Shackles
• 1 x Equaliser Strap (Bridle Strap)

Roadsafe 4WD have put together some Tow Point kits including points,
shackles and equalising bridle to encourage the use of Tow Points in pairs.

Off road driving demands for strong, reliable recovery points to cope with a huge variety of
recovery situations. The purpose of a recovery tow point is to provide a safe and secure point
from which to recover a stuck vehicle.

Roadsafe 4WD strongly recommend fitting Tow Points as a matched pair, bolted to the Chassis,
and used in conjunction with each other in all straight line pull recovery situations with use of an
Equalising Bridle. Warranty will not be considered if Tow Points are not used as recommended.

An Equalising Bridle is designed to evenly distribute the load on the vehicle during the recovery
operation when connected to the two recovery tow points. The Roadsafe 4WD Equalising Bridles
are designed in 2.5m x 6000kg minimum breaking strength, with a movable protective sleeve in the
middle and black reinforced eyelet protectors.

Most Roadsafe 4WD Tow Points have been designed for use with a 4.7t Bow Shackle.
When bolted to the chassis, the use of Roadsafe 4WD Tow Points, used in conjunction with an
Equalising Bridle attached with 4.7t Bow Shackles, creates a safer vehicle attachment system for
recovery situations.

Setting up this system is straight forward, secure one eye of the equalising bridle to one of the
installed Roadsafe 4WD Tow Hooks, pass the other end through the eye on the end of the snatch
strap intended for use during the recovery operation. Then, hook the second end of the equalising
bridle to the other installed Roadsafe 4WD Tow Hook. Line the equalising bridle up with the
direction of pull intended and locate the protective sleeve on the equalising bridle in the snatch strap
eye.

All Roadsafe 4WD Tow Points have been destruction tested during development, to ensure they
have the ability to cope with a variety of potential recovery situations.

.

Small PRO Catch Can with Washable Filter - Toyota Landcruiser 80 / 100 / 105 / 76 / 79 Series

$99.00

This UNIVERSAL Professional Catch Can allows you to filter the air from your crankcase and filter the oil / contaminates from you inlet system, which inturn stops the oil entering the turbo and sludging up the inlet manifold.

• Top hat with outlet can be pointed in 4 directions.
• Universal fitment.
• Features 19mm inlet and outlet .
• The multi layer stainless steel mesh filter traps oil from your blow by air.
• Filter can be washed or replaced.
• Features an oil drain that can be capped or returned to the sump etc.
• Excess pressure relief valve.
• Pressure regulator.
• Completely legal (closed system).
• Factory appearance.
• The unit is of a high quality and built tough!

NOTE:
This Unit is sold as a UNIVERSAL catch can....meaning it can be made to fit any vehicle
BUT it means the installer may need to purchase additional Hoses and fittings to fit
the unit in the position the owner wishes to fit it, just like any other catch can.

All dimensions are listed in the diagram above.

These have been fitted these to everything from ls1's to patrol's and tractors.

Toyota 80 Series Landcruiser Radiator Overflow Bottle

$39.95