D44 Fairlead Stainless Steel Standard

$239.82

D44 Fairlead Stainless Steel Standard

When using synthetic ropes, the rope can become trapped in the corners of a roller fairlead and pick up damage. Equally, aluminium hawse fairleads can be quickly worn by mud and grit as the rope passes over them. Made in high-nickel, 316 marine-grade stainless steel, the fairlead looks superb on the vehicle. Our unique, one-piece cast design provides a completely smooth finish with no edges to snag your rope. Available to fit Warn winches. Please check compatibility with other winches before ordering.

Gigglepin Rope Splicing Kit

Sold Out

Gigglepin rope Splicing kit. Our rope splicing kit is designed to provide an easy to use product to all users of synthetic winch rope. The kit comes in a plastic tube which can be easility stored, no matter if your a competition, recreational or commercial user, this kit is jsut what you need to splice synthetic ropes.

Kit Contains:

•10mm Stainless Steel "Fid" tool
•Roll of insulating tape
•Craft Knife with spare blades
•GP Rope splicing guide

Nissan GU Patrol Winch Cradle to suit Genuine Alloy Bullbar

$295.00

Designed to suit the Nissan GU Patrol
with genuine alloy bullbar.

Our winch cradle solves the problem facing many Patrol owners.

Until now you couldn’t put an electric winch into your Nissan Patrol fitted with a genuine alloy bullbar as there wasn’t a winch mounting plate available.

 

With our customers in mind we developed this cradle to solve the problem.

Made to suit 99% of winches on the market.
(including Chinese copies)

When designing this winch cradle compatibility was a key requirement.

That’s why we employed the Warn Winch mounting footprint. Warn has become the industry standard for electric winches and as a result most other manufacturers have copied their mounting specifications.

Roller or Hawse fairlead compatible.

Whether you’re running synthetic rope or steel cable we have you covered. Once again we utilised the industry standard for the fairlead mounting so both roller and hawse fairleads will fit.

Built to last!

Made from 8mm cold rolled mild steel they are strong, VERY STRONG!

 

Not only that, they come finished in a gloss black powder coat finish to ensure it stays looking good for years.

Don’t spend $1000’s of dollars to change your bullbar

There is no need to change to a steel bullbar just to fit a winch. At a fraction of the cost to replace your bullbar you can achieve the same result using our winch cradle.

Reduced vehicle weight

By removing the need to install a heavy steel bulbar you reduce the weight over the front axle. The effect of this is;

• Decrease fuel consumption.
• No need to upgrade front suspension.
• Reduce tyre wear.
• Increase vehicle carrying capacity.

Easy to fit yourself.

Thanks to our comprehensive fitting instructions installation couldn’t be easier. Even people with little mechanical knowledge can competently tackle the install.

From our happy customers.

Blair Robertson
Coopers Plains, Queensland.
“Great work guys, the cradle fits very simply onto the rails behind my alloy bar. Its neat, quick to fit and looks great. I have been able to keep the original lightweight alloy bar and still have a fully functional recovery winch. This looks great. Thanks again for a great product.”

Greg
Hervey Bay, Queensland.
“This product is great. Delivery received today. extremely quick. The product is as described. Thanks for your great service and honesty with the postal charges.”

Steve LeBoydre
Beeliar, Western Australia.
“Fast delivery. A much cheaper alternative to a winch bar. Thanks!!”

Sammy
Sunbury, Victoria
“Can’t be believe how easy it was to put in and looks soooo strong love it”

Jody Tyquin
Heyfield, Victoria
“Fantastic easy to fit quick delivery great workmanship”

John Spencer
Palmwoods, Queensland
“Excellent piece of gear, very well made and strong”

IMPORTANT NOTICE:

If your Patrol was built prior to 7/2001 you will require this additional Nut Kit. Please contact us to order these.

FAQ’s

What is included in the kit?

The kit comes with all the necessary components for the installation. A full list of components is provided below.

Can I fit this winch cradle myself?

Yes. Thanks to our comprehensive “step by step” fitting instructions installation couldn’t be easier.

Do I need any special tools to fit this cradle?

No, we have designed this winch cradle in such a way that only basic hand tools are required to perform the installation.

Will it fit my bullbar?

Over the years Nissan has released a number of alloy bullbars for the GU Patrol so to be sure please contact us for conformation.

How long will it take to fit my winch cradle?

A competent mechanic should take about 3 hours which includes removing the bullbar, installing your winch onto the winch cradle and refitting the bullbar. This time will vary however depending on the experience of the installer.

Has this winch cradle been certified for airbag compatibility ?

The winch cradle was designed with air bag compatibility in mind and utilises the same mounting points as that of the Nissan air bag compatible steel bullbar. However, crash testing and certification has not been performed therefore the product is for non air bag models only.

Kit Contents:

• 1 x Winch Cradle
• 2 X M12*1.25 * 40mm High Tensile Bolts
• 2 X M12 High Tensile Flat Washers
• 2 X M12 Spring Washers
• 1 X Comprehensive Fitting Instructions (Online)

Fitting Instructions

Download Instructions

Nissan Navara D22 Winch Cradle to suit Genuine Alloy Bullbar

$295.00

DESIGNED TO SUIT THE NISSAN D22 NAVARA
WITH GENUINE ALLOY BULLBAR.

QIKAZZ Wide Mouth Comp Winch Fairlead suit +100 Widened Drum

$155.00 $195.00

The New QIKAZZ Wide Mouth Comp Winch Fairlead is finally here.

This one is to suit a +100 width widened Winch Drum, we also have them available to suit Standard and +76mm Widened Drums. 

Cold Bent from 22mm Stainless Rod is has a mouth opening approx 95mm high.

If you suck your winch damper into the front you wont have any issues getting it back out again. 

QIKAZZ Wide Mouth Comp Winch Fairlead suit +76 Widened Drum

$155.00 $195.00

The New QIKAZZ Wide Mouth Comp Winch Fairlead is finally here.

This one is to suit a +76 width widened Winch Drum, we also have them available to suit Standard and +100mm Widened Drums. 

Cold Bent from 22mm Stainless Rod is has a mouth opening approx 95mm high.

If you suck your winch damper into the front you wont have any issues getting it back out again. 

QIKAZZ Wide Mouth Comp Winch Fairlead suit STD Drum

$155.00 $195.00

The New QIKAZZ Wide Mouth Comp Winch Fairlead is finally here.

This one is to suit a Standard width Winch Drum, we also have them available to suit +76mm and +100mm Widened Drums. 

Cold Bent from 22mm Stainless Rod is has a mouth opening approx 95mm high.

If you suck your winch damper into the front you wont have any issues getting it back out again. 

Runva Offset Hawse Fairlead

$69.00

Synthetic Winch Rope - 10mm - 30meters - GREY - 9000KG

Sold Out

AUSTRALIAN MADE WINCH ROPE

100% 12 plait UHMWPE Fibre with Polyeurethane Coating

10mm x 30meters
9000KG Breaking Strain

30meters to suit most low mount winches

Has bright covered soft eye splice for high visibility and protection of splice.

Rope Specs:-
- Melting point:- 150 Deg
- Specific Gravity:- 0.97 (Floats)
- Water absorption:- NONE
- UV Resistance:- GOOD
- Maximum strength to weight ratio, and strength comparable to steel
- Lowest elongation
- Longer lide, and easy handling
- Good abrasion resistance
- Non-kinking and non-rotational
- Easy to splice

Thunder Offset Hawse Fairlead - TDR02301

$51.95

The Thunder standard and offset hawse fairleads are essential if using a synthetic rope as they avoid rope being caught between the rollers of fairleads designed for wire cable. The offset fairlead is designed to suit bar mounted winches.

For use with rope only, do not use with wire.

Warn 26370 Winch Carrier (includes wiring for front of vehicle)

Sold Out

WINCH CARRIER
Mount your WARN winch to this carrier for a portable winch configuration. Constructed of black coated steel. Predrilled to mount the VR10000, 9.5xp, XD9000i, XD9000, M8000, VR8000 and M6000 winches. Carrier kit includes Quick Connect wiring for front of vehicle (winch and rear wiring is sold separately).

PN 26370 Winch carrier and wiring for front of vehicle. Winch sold separately. Note: to mount the 9.5ti/9.5cti you must purchase as a complete kit.

Warn Spydura Synthetic Rope 9.5mm x 24M (3/8” x 80’)

$535.00

Spydura synthetic winch rope is constructed of a unique ultra high molecular weight polyethylene material and offers high abrasion resistance and tremendous tensile strength. Coated with high temperature urethane, equipped with a temperature resistant sleeve on the first layer and a ballistic nylon sliding sleeve, Spydura synthetic winch rope provides extreme protection against wear and abrasion. The unique self-tightening rope attachment designed to hold the rope secure on the winch drum makes this exclusive offering from Warn ideal for pushing the limits on the trail.

• Constructed of a unique ultra high molecular weight polyethylene material
• Delivers high abrasion resistance and excellent tensile strength
• Coated with urethane for increased UV and chemical resistance
• Includes a high temperature resistant sleeve on the first layer, and a unique self-tightening rope attachment designed to hold the rope secure on the winch drum
• A ballistic nylon sliding sleeve provides extra protection against abrasion and wear
• For winches with 10,000 lb. (4535 kg) pull rating or less (excludes M8274-50)

Note: rope must be used with standard black or polished aluminum hawse fairlead

PN 88468 9.5mm, 24m Spydura Synthetic Rope

Warn Spydura Synthetic Rope 9.5mm x 30M (3/8” x 100’)

$510.00

Spydura synthetic winch rope is constructed of a unique ultra high molecular weight polyethylene material and offers high abrasion resistance and tremendous tensile strength. Coated with high temperature urethane, equipped with a temperature resistant sleeve on the first layer and a ballistic nylon sliding sleeve, Spydura synthetic winch rope provides extreme protection against wear and abrasion. The unique self-tightening rope attachment designed to hold the rope secure on the winch drum makes this exclusive offering from Warn ideal for pushing the limits on the trail.

• Constructed of a unique ultra high molecular weight polyethylene material
• Delivers high abrasion resistance and excellent tensile strength
• Coated with urethane for increased UV and chemical resistance
• Includes a high temperature resistant sleeve on the first layer, and a unique self-tightening rope attachment designed to hold the rope secure on the winch drum
• A ballistic nylon sliding sleeve provides extra protection against abrasion and wear
• For winches with 10,000 lb. (4535 kg) pull rating or less (excludes M8274-50)

Note: rope must be used with standard black or polished aluminum hawse fairlead

PN 87915 9.5mm, 30m Spydura Synthetic Rope

Warn Wire Rope 11mm x 27M (7/16” x 90’) suits M15000, 16.5ti

$360.00

Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other.

Warn Wire Rope 8mm x 30M (5/16” x 100’) suits M8000, XD9000, 9.5XP

$285.00

Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other.

Warn Wire Rope 8mm x 38M (5/16” x 125’) suits 9.5cti, XD9000i

$310.00

Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other.

Warn Wire Rope 8mm x 46M (5/16” x 150’) suits M8274-50

$280.00

Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other.

Warn Wire Rope 9.5mm x 24M (3/8” x 80’) suits 12.0XE

$240.00

Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other.

Warn Wire Rope 9.5mm x 38M (3/8” x 125’) suits M12000

$360.00

Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other.