Description
Genuine Nissan swivel hub wiper seal (part number 40579-VB000, Nissan name "Seal-Grease, Knuckle Flange") for the Nissan Patrol GU Y61. It sits at the back of the swivel hub housing and wipes the chrome swivel ball as you steer, keeping water, mud and dust out of the housing and the grease in. A worn wiper seal is one of the most common causes of rusty swivel balls, contaminated kingpin bearings and leaking swivel hubs on GU Patrols.
Features
- Genuine Nissan part, made in Japan
- Steel-cased seal with a rubber wiping lip for a tight fit against the swivel ball
- Protects the kingpin (swivel) bearings, CV joint and inner axle seal from water and grit
- Sold individually. One seal is used per side, so two are needed to do both front hubs
Fitment
- Nissan Patrol GU Y61, 1997 onwards, front swivel hubs (left or right)
- All engines: TB45E, RD28ETi, TD42, TD42T/TD42Ti, ZD30 Di and CRD, TB48DE
- Does not suit the GQ Y60, which uses a different seal
Signs your wiper seal needs replacing
- Grease or oil weeping from the back of the swivel housing
- Water or milky grease found when the swivel hub is opened
- Rust, pitting or grit build-up on the swivel ball
- Torn, hard or flattened seal lip
Fitting tips
- Replace both sides at the same time so the seals wear evenly
- Clean the swivel ball thoroughly and polish out any light rust before fitting the new seal, as a rough ball will wear a new seal quickly
- Check the seal retainer plates and the kingpin bearings while the hub is apart
- Lightly grease the seal lip on assembly
Related parts
- Roadsafe Swivel Hub Bearing & Seal Kit for Nissan Patrol GU Y61
- Roadsafe Swivel Hub & Axle Rebuild Kit for Nissan Patrol GU
- Drivetech Swivel Hub & Wheel Bearing Kit for Nissan Patrol GU Y61
Not sure it suits your vehicle? Send us your VIN and we'll confirm the correct part before you order.

