Description
!!! FREE POSTAGE !!!
Roadsafe 4wd / Blackhawk Front Sway Bar Relocation Plates - 120 Series Prado & 150 Series Prado with the 82mm spacing
NOTE : Prado 120 has a build variation with regard to front sway bar bracket hole spacing. There is no link back to VIN or year model, so measuring to ensure accurate ordering is required. The options available are 82mm or 76mm hole centre/centre. Sway bar relocation plates are now available for both options
Will also suit Prado 150 without KDSS. Please check measurements, mounting hole centre to centre should measure 82mm
When fitting suspension & lifting vehicles more than 2" it is advisable to fit a sway bar relocation plate to your front sway bar.
If your sway bar is out of alignment then handling can be affected & this geat little product from Blackhawk can help you enjoy your vehicle. It will adjust & correct angles created when you have installed a lift by lowering the mounting position of your sway bar down to the correct position needed to improve ride handling.
Please Note: Prado 120 Series have a build variation with regards to the front sway bar bracket hole spacing. There is no link back to a specific year or VIN, so measuring the spacing needed is required to get the acurate fit. This is for the 82mm hole centre/centre if you require the 76mm option the Click here.
Sold as a PAIR
| Toyota Prado 120 Series | 82mm Hole C/C |