Description
Genuine Nissan exhaust nut, part number 20602-41G0A. It's a flanged hex nut used on the hot side of several Nissan diesel engines: on the exhaust manifold of the ZD30, on the turbo-to-manifold and manifold-to-head studs of the TD42T/TD42Ti, and on the dump pipe-to-turbo joint of the YD25.
Exhaust nuts get heat-cycled hundreds of times. They stretch, corrode and lose clamping force. A loose or tired nut lets the gasket leak. Before the turbo that costs you boost, power and fuel economy. At the manifold you'll usually hear a ticking noise, and fumes can get into the engine bay or cabin. Fitting new nuts whenever you have the manifold, turbo or dump pipe off is cheap insurance.
Features
- Genuine Nissan part: 20602-41G0A (supersedes 20602-41G00).
- Flanged hex design: the built-in flange spreads the clamping load evenly over the exhaust flange and gasket. No separate washer needed.
- Made for exhaust heat: built to hold its clamping force through repeated heat cycles.
- Sold individually: order the number of nuts your job needs.
Vehicle fitment
- Nissan Patrol GU Y61 – ZD30 Di and ZD30 CRD (exhaust manifold to cylinder head)
- Nissan Patrol GU Y61 – TD42T and TD42Ti (turbo to exhaust manifold, and exhaust manifold to cylinder head)
- Nissan Navara D22 – ZD30 Di (exhaust manifold to cylinder head)
- Nissan Navara D22 and D40 – YD25 (turbo dump pipe)
- Nissan Pathfinder R51 – YD25 (turbo dump pipe)
Installation tips
- Soak old nuts in penetrating oil before removal, and replace any studs with damaged threads
- Always fit a new exhaust gasket when you replace the nuts
- Tighten evenly in a crisscross pattern to Nissan's torque spec
- Re-check the torque after the first few heat cycles
Related parts
Not sure it suits your vehicle? Send us your VIN and we'll confirm fitment before you order.

