Gigglepin Albright Super Duty Winch Solenoid 12V or 24V
G70202
$161.00
These Super Duty Solenoids are manufactured by Albright International specially for Gigglepin 4x4 - do not accept cheap imitations!
In a small, water resistant package, the Albright solenoid can be located near the winch, or in the engine bay for ultimate reliability.
One Albright contactor is needed to replace the solenoid pack on standard single motor electric winches.
The features of the GP Albright Super Duty Solenoid are:
- Lower casing made from less rigid material making the unit more resistant to knocks and bangs
- Built in mounting brackets for secure fitment
- Heavier duty internal contacts
- Spade Terminals for switching circuitry spaced further apart for ease of fitting/maintenance
- 1 yr component failure warranty
- Gigglepin branded label
- Supplied with wiring diagramgibatt
PLEASE NOTE: THE 12/24V DIFFERENCE APPLIES TO THE SWITCHING CIRCUITRY VOLTAGE ONLY - IF YOU REQUIRE A 12V SOLENOID PLEASE SEE OUR 'PRO SERIES ALBRIGHT CONTACTER
Related Items
Bow Motor 3 12v 9HP For Warn 8274 High Mount Winch
Sold Out
Bow Motor 3 12v 9HP
These tried and tested incredibly powerful Bow ‘3’s feature the following:
- The nominal speed is 4,000 rpm, similar to a Bow ‘1’ but with a huge amount of torque and rated at an amazing 9HP.
- Huge 5” diameter x 10” long (125 x 252mm) housing complete with adaptor to not only help the motor to run cooler, but also to contain a massive armature and copper welded commutator.
- 8 huge brushes, each with twin insulated flexible copper wires located in solid brass brush holders mounted in a cast aluminium frame to take away some of the heat and provide a bearing block at the back end.
- 4 large field coils surround the armature all connected with heavy copper bus bars.
All in all a motor and a half!!
These motors will fit straight onto any GP80 series winch, or any GP Twin Motor Top Housing and, with a small amount of modification to the adaptor, will easily fit to a standard Warn 8274 (instructions supplied) but we would recommend that one of our uprated mainshafts are fitted if not already.
To get the best out of these motors you will need a very good battery setup, ideally 3 big 12 volt batteries in parallel driven by a big alternator– a 150 amp one would be brilliant. The supplied adaptor allows these Bow ‘3’s to be bolted onto the Bow ‘1’ & ‘2’ etc fixing holes on the winch.
View full product details
Gigglepin Adventure Series Twin Motor Top Housing
Sold Out
Product Discontinued.
The New Adventure series Twin-motor top housing is the first of a new range of Gigglepin products.
This Twin-motor top housing still gives you the same Gigglepin High Quality but at a great new lower price.
The original Pro series Twin-motor top housing is still our flagship model,
But it was obvious that another slightly different model was required for a NEW emerging market.
The Adventure series Twin-motor Top housing was born.
The New Top housings boast the following features:
Cast LM67 Aluminium housing for strength and reliability.
Large EN36 case hardened gears for ultimate performance.
Fully supported motor pinion gears to stop motor shaft flex.
NEW “flat-back” profile allows the winch to be fitted tight to radiators and intercoolers.
+25% gear ratio for high speed, powerful recovery.
Twin motors for hugely increased speed and torque.
Multiple large bearings for enhanced smooth operation.
Fits ALL Warn 8274 and ALL Gigglepin GP80 series winches.
Unbeatable value and quality.
Supplied with fitting instructions, Breather elbow and pipe and mounting nuts and bolts.
3 year Warranty (Does not include bearings).
Gigglepin Air Manifold Kit
$94.48
The Gigglepin Air Manifold kit is designed to allow easy & tidy fitment of up to 6 air fittings.
This product has been desgined primarily to allow the user a combination of multiple air locking diffs and/or air free spool systems.
Supplied with:
5x 1/8bsp male to male adapotors
5x 1/8bsp Blanking plugs
1x 1/8bsp elbow 6mm (quick fit)
1x 1/4bsp elbow 6mm (quick fit)
1x 1/4bsp blanking plug
1metre 6mm air pipe
1x PTFE tape
We also recommend the use of the Gigglepin Airline Kit with this product
Gigglepin Air Solenoid Switch and Valve
$50.49
Gigglepin Air Solenoid Switch and Valve
These tough little units are used by Gigglepin on our Free-spool winches and with our Free-spool drums. They can also be use with ARB locking differentials and Ashcroft locking differentials.
Using more than two ? then why not mount them on the Gigglepin air manifold to help keep them tidy.
Specification:
- 12v operation
- 1/8bsp input and outlet
- Max working pressure 150psi
- Aluminum housing for corrosion resistance
- Perfect replacement for ARB solenoids
View full product details
Sign up to get the latest on sales, new releases and more …
© 2019 QIKAZZ 4x4 & Camping.
Powered by Shopify
