Roadsafe 4wd HD Recovery Tow Point Kit for Ford Everest 2016+

5 reviews
Save $54.00
RoadsafeSKU: RPRAN02

Price:
Sale price$345.00 Regular price$399.00

Description

!!! FREE POSTAGE !!!
Decent recovery points are a must, far to often people are using the factory TIE DOWN points as recovery points, using the factory tie down points it a huge risk and can potentially cause harm, even death when it breaks, sending the strap or winch cable flying. The roadsafe kit listed here is a complete kit and will have all bases completely covered. Its a must for any serious off roader.
  • Made from 18mm SS41 carbon steel plate
  • Direct bolt onto your chassis using high tensile bolts - no cutting or welding required
  • Powder coated yellow for high visibility
  • Matched pair - specific to each side
  • Allow for use of 4.75T bow shackles and a bridle strap
  • Rated to a Working Weight Limit (WWL) of 5000 Kg per tow point

To suit:

  • Ford Ranger PX , PX2, PX3 2011 - Onwards
  • Mazda BT-50 Gen 2 2011 - Onwards
  • Ford Everest 2016 - Onwards

This kit comes complete with the following items.

  • 2 x Tow Points
  • All Bolts, plates, washers etc as required

 Please check the fitment notes here if you have an aftermarket bullbar fitted. 

Fitting guide can be found here. 

PX3 & Everest post 06/2018 - A stiffening plate installed in the chassis rail affects access to one hole used in the fitment. Using a step drill you can enlarge this hole to allow hardware fitment. The spacer will require modification to clear the new weld not present on previous models. The nut plate will sit behind the stiffening plate Click here to view product bulletin.

Roadsafe 4WD have put together some Tow Point kits including points,
shackles and equalising bridle to encourage the use of Tow Points in pairs.

Off road driving demands for strong, reliable recovery points to cope with a huge variety of
recovery situations. The purpose of a recovery tow point is to provide a safe and secure point
from which to recover a stuck vehicle.

Roadsafe 4WD strongly recommend fitting Tow Points as a matched pair, bolted to the Chassis,
and used in conjunction with each other in all straight line pull recovery situations with use of an
Equalising Bridle. Warranty will not be considered if Tow Points are not used as recommended.

An Equalising Bridle is designed to evenly distribute the load on the vehicle during the recovery
operation when connected to the two recovery tow points. The Roadsafe 4WD Equalising Bridles
are designed in 2.5m x 6000kg minimum breaking strength, with a movable protective sleeve in the
middle and black reinforced eyelet protectors.

Most Roadsafe 4WD Tow Points have been designed for use with a 4.7t Bow Shackle.
When bolted to the chassis, the use of Roadsafe 4WD Tow Points, used in conjunction with an
Equalising Bridle attached with 4.7t Bow Shackles, creates a safer vehicle attachment system for
recovery situations.

Setting up this system is straight forward, secure one eye of the equalising bridle to one of the
installed Roadsafe 4WD Tow Hooks, pass the other end through the eye on the end of the snatch
strap intended for use during the recovery operation. Then, hook the second end of the equalising
bridle to the other installed Roadsafe 4WD Tow Hook. Line the equalising bridle up with the
direction of pull intended and locate the protective sleeve on the equalising bridle in the snatch strap
eye.

All Roadsafe 4WD Tow Points have been destruction tested during development, to ensure they
have the ability to cope with a variety of potential recovery situations.

.

Customer Reviews
5.0 Based on 5 Reviews
5 ?
100% 
5
4 ?
0% 
0
3 ?
0% 
0
2 ?
0% 
0
1 ?
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
BK
14/11/2021
Ben K.
Australia Australia

Great recovery points

Looks great, solid as a rock

DT
08/06/2021
David T.
Australia Australia

Good fit

Installed on 2017 Everest and had to trim the NOWs with angle grinder to fit them in the access hole on the back of the chassis frame. Otherwise it all went according to instructions. Haven’t used them yet but they look OK with the Ford nudge bar I also have installed.

QIKAZZ 4x4 & Camping Roadsafe 4wd HD Recovery Tow Point Kit for Ford Everest 2016+ Review
T
10/09/2020
Tim
Australia Australia

Great solid product and relatively easy install

Bought these for my 2017 PX2 ranger as I do not have a bullbar or winch and needed a simple inexpensive solution for recoveries. Best price I could find, install wise was actually quite easy. I would offer some tips on install that were not in the instructions: You definitely do need to remove the bash plate to get the NOWs into the hole in the back of the chassis rails (instructions say bash plate removal is optional) but I installed these without jacking the car up or removing wheels, just turned them all the way to the side. Passenger side is easier than drivers side so good idea to do that first!

CY
01/06/2020
Charlie Y.
Australia Australia

Fabulous product at great price

Quite challenging to install but now it’s there it’s very solid and reliable!

KD
02/01/2020
kelly d.
Australia Australia

Excellent service

Very fast delivery, arrived in time for Christmas. Fantastic service and communication

You may also like

Recently viewed